57
1.
In the programming mode, enter “73”.
2.
Enter the code for the Outgoing Call Group being created:
4 Outgoing Call Group #1
5 Outgoing Call Group #2
6 Outgoing Call Group #3
7 Outgoing Call Group #4
If you do not want any outside lines in this Outgoing Call Group, hang up.
3.
Enter the line numbers of the outside phone lines(s) that are part of this
Outgoing Call Group. Enter one to four entries.
1 Outside Line #1
2 Outside Line #2
3 Outside Line #3
4 Outside Line #4 (IPS 416 model only)
4.
Hang up
Hanging up is necessary if fewer than 4 outside lines were entered.
Defi ning Outgoing Call Groups
You can de
fi
ne up to 4 Outgoing Call Groups. Each group can include from none to 4 (3 for IPS
308 model) outside lines. Each outside line can be included in more than one trunk group. The
order in which the line numbers are entered (in Step 3) will determine the order in which the
system searches them for availability when an extension dials ‘9’ (or ‘0’) to connect to an outside
line. If you want a certain line to be tied up the least (i.e., the fax line) but still available for outside
calls, enter it last.
73
Central Offi
ce Lines- Outgoing Calls
Chapter
3
- Functions Of IPS System
