61
Four separate Hunt Groups can be implemented, allowing a person to dial a number which will
ring at the
fi
rst available extension of that group. This can be used for intercom calls or for
incoming DISA calls where the incoming caller can be prompted to “press 3 for sales, press 4 for
technical support, etc.”. There are four groups named as Hunt Group #2, #3, #4, and #5 and each
Hunt Group can contain 4 extensions. The Hunt Groups are accessed as follows:
To call an
For intercom calls or to
For an incoming
extension in:
transfer an outside line:
DISA caller:
Hunt Group #2
dial “ 122 ”
dial “ 2 ”
Hunt Group #3
dial “ 133 ”
dial “ 3 ”
Hunt Group #4
dial “ 144 ”
dial “ 4 ”
Hunt Group #5
dial “ 155 ”
dial “ 5 ”
If an extension in a Hunt Group desires not to receive calls temporarily, then they may forward
their calls to another extension or to a different Hunt Group. If an extension in a Hunt Group
desires not to receive calls for a period of time (i.e. out of the of
fi
ce or vacation), then that
extension should enter the Do Not Disturb mode.
To Enable The Use Of The Four Different Hunt Groups
Hunt Groups must be enabled so that the Hunt Group codes will be recognized by the unit.
Hunt Groups
7854
To enable Hunt Groups:
In the programming mode, enter “7854”.
Pause for the con
fi
rmation tone.
To disable Hunt Groups:
In the programming mode, enter “7855”.
Pause for the con
fi
rmation tone.
7855
Hunt Groups
