134
XFER
– Used in the process of transferring outside calls to another extension.
CONF
– This will allow you to conference in another outside call or extension into a
conversation.
MEM
– This provides access to personal and system speed dial numbers.
MSG
– Provides the capability to turn on another key telephone’s message lamp (LED).
FLASH
– Allows you to switch between tone dialing (DTMF) and pulse dialing (Rotary).
PAUSE/BREAK-IN
– PAUSE allows you to insert a 2 second delay using personal speed dial
numbers; BREAK-IN
allows you to interrupt another conversation.
REDIAL
– This will automatically redial the last number that was dialed.
CALL ID
S
and
CALL ID
T
– Show the status of the active CO lines and Caller ID history.
VOL
S
and
VOL
T
– Adjust the volume for “speaker phone” conversations, handset
conversations, and ringing.
RING POS
– Allows the phone to ring during an incoming call.
DSS (Direct Station Selection) 100 to 115
The DSS (Extension Buttons) allows you to quickly access another extension to place an intercom
call or to transfer an outside line. It also provides a visual indication to see if extensions are busy
or not. Buttons 108 to 115 can alternatively be used for speed dial numbers.
The following list will show the pattern of the extension LED’s and the associated state.
•
Off
– Extension is inactive or in the Do Not Disturb mode.
•
Red
– Extension is active.
•
Flashing Red with a triple beep
– Indication to you, while on a phone conversation, that
this extension is attempting to call you.
Central Offi ce (CO) Lines 1 to 4
The CO buttons allow you to access CO lines to make outside calls. They also provide a visual
indication to see if the CO lines are busy or not.
The following list will show the pattern of the CO line LEDS and the associated state.
•
Off
– The CO line is not in use or is unavailable for use.
•
Solid Red
– The CO line is in use by another extension.
•
Solid Green
– The CO line is in use by this extension.
•
Slow Flashing Red
– The CO line has been put on hold by another extension.
•
Slow Flashing Green
– The CO line has been put on hold by this extension.
•
Fast Flashing Red
– The CO line has an incoming call.
•
Fast Flashing Green
– The CO line is parked at this extension.
Chapter
5
- IPS System Used With IVT-16 Key Telephone
Key Telephone Features
