98
Switch-hook Timing To Outside Line
This sets the time duration for making a switch-hook on the outside line. This would be needed to
activate features such as Call Waiting. The ability to send a switch-hook to an outside line must
be enabled for each outside line. (See “Programming Outside Lines”, page
48).
11.
Enter the “outside line switch-hook time” code:
0
96 milliseconds
1
192 milliseconds
2
288 milliseconds
3
384 milliseconds
*
4
480 milliseconds
5
576 milliseconds
6
672 milliseconds
7
768 milliseconds
8
864 milliseconds
9
960 milliseconds
Rollover On Standard Incoming Calls Timing
For incoming calls to outside lines operating in the Standard Incoming Calls mode, this is the
amount of time an incoming call will ring at the designated extension(s) before it will start to ring
a Rollover Extension (voice mail).
12.
Enter the “Rollover on Standard Incoming Calls time” code:
0
5 seconds
1
10 seconds
2
15 seconds
3
20 seconds
4
25 seconds
5
30 seconds
6
35 seconds
7
40 seconds
8
50 seconds
*
9
60 seconds
Chapter
3
- Functions Of IPS System
System Timing Parameters
