162
For IVT-16 Key Telephone
The following table shows the commands for accessing the special features. Your System Manager
may have con
fi
gured your system to require the “*” key to be pressed before dialing sequences
beginning with a ‘4’ or ‘5’ digit.
Pg# Sequence
Description
56
From the Operator station only, set Night mode.
57
From the Operator station only, set Day mode.
147
DSS or 1 nn
Place an intercom call to extension or to one of the Hunt
Groups.
148
3
Pick up an intercom call ringing at another extension.
150
CO 1 to 4
Retrieve CO calls placed on hold.
153
FWD, DSS
Forward all calls from this extension to another extension.
153
FWD
Cancel the forwarding of calls from this extension.
154
43, DSS
Forward all calls from another extension to this extension
(Follow Me).
154
53, DSS
Cancel calls being forwarded from another extension to this
extension. (Clear Follow Me)
154
40 nnnnnn
Enter the 6-digit Call Unbarring Password.
155
59
Force this extension to use the restricted calling list.
155
50 nnnnnn
The correct password “nnnnnn” will cause this extension to no
longer use the restricted calling list.
156
410
Connect to pager output.
156
411
Connect to the key telephones and door phones in
Pager Group #1 and to the pager output.
156 412
Connect to the key telephones and door phones in Pager Group #2.
156
MSG, DSS
Turn on the message light / command at another extension.
157
55, DSS
Turn off the message light / command at another extension.
157
DND
Place the phone at this extension into the Do Not Disturb
mode.
157
DND
Take the phone at this extension out of the Do Not Disturb
mode.
158
45, hh, mm
Set the alarm clock for ‘hh’ hours (0 to 23) and ‘mm’ minutes
(0 to 59).
158
46
Cancel the alarm clock setting.
158
49
Start the Emergency Alarm signal to all extensions.
159
MEM nn
Place an outside call using one of the speed dial numbers.
Dialing Code Sequences
Dialing Code Sequences
