BBS IPS 308 User Manual Download Page 159

Page: 159 / 166

156

Paging – External / Groups #1 and #2

There is a Paging Output at the system which the System Manager may optionally connect to an
external ampli

er and speaker.

Additionally, it is possible for any extension to send an external page or an internal page to any or
all key telephones and door phones.

The System Manager will make the assignments of key telephones and door phones into the
Paging Groups #1 and #2.

External Paging:

Lift the handset and enter “410”, then voice announce.

External Paging and Page Group #1:

Lift the handset and enter “411”, then voice announce.

Page Group #2:

Lift the handset and enter “412”, then voice announce.

410

411

412

Message Lamp / Waiting

Any key telephone may activate the “message lamp” of another key telephone extension or the
“message waiting” tone of a standard phone.

This will typically be done by the Voice Mail Unit, but a manual messaging system may be
implemented where the “System Operator” can manually turn on or turn off the message lamp at
individual extensions.

To turn on the Message Lamp / Waiting:

Lift the handset, then press the MSG button.

MSG

Special Features

Chapter

- IPS System Used With IVT-16 Key Telephone

Summary of Contents for IPS 308







































































































































































Search results

Summary of Contents for IPS 308

Reviews:

Related manuals for IPS 308

Brands by name

Popular brands

BBS IPS 308, User Manual

Search results

Summary of Contents for IPS 308

Reviews:

Related manuals for IPS 308

Brands by name

Popular brands