86
Output The Call History After Each Outgoing Call
You can choose to have the IPS output the Call History records at the end of each outgoing call
lasting more than 25 seconds. The information will also be stored into Call History Memory if
space is available.
7842
To output the Call History record at the end of each call:
In the programming mode, lift the handset and enter “7842”.
To not output the Call History record at the end of each call:
In the programming mode, lift the handset and enter “7843”.
7843
Automatic Call History Retrieval Program
The IPS allows an external computer program to retrieve the call records stored in Call History
memory to send commands to the IPS via the RS232C port. This feature must be enabled by
the following command to allow the IPS to respond to these commands from the PC. Also, the
RS232C port must be in the “Feature Mode” (see “RS232C Port – Choosing The Operating
Mode”, page 89).
7852
To enable the Automatic Call History Retrieval program:
In the programming mode, lift the handset and enter “7852”.
To disable the Automatic Call History Retrieval program:
In the the programming mode, lift the handset and enter “7853”.
7853
Outgoing Call Records And Histories
Chapter
3
- Functions Of IPS System