81
Clear Speed Dialing And Call Barring Tables
This command will erase all of the values in the global speed dialing table and all of the values
in the Call Barring (Toll Restriction) tables. The speed dialing numbers assigned to individual
extensions are not affected. This command also resets the individual extension Call Barring
passwords to their default value (“111111”). (See page 117 & 154 for more information about
individual call barring.)
In the programming mode, enter “7875”. Pause for the con
fi
rmation tone.
Hang up or continue programming.
7875
Dial Tone Detection
Specially equipped versions of the IPS can be programmed to detect that a dial tone is present
from the Central Of
fi
ce before a speed dial or redial operation will start sending the digits to the
Central Of
fi
ce. When this command is disabled (default condition), the IPS will wait the amount
of time set in the “Speed Dialing Delay Time” parameter before dialing the digits (see “Speed
Dialing Delay Time”, page 100).
Dial Tone Detection will only operate on IPS units which contain the optional dial tone
detection hardware.
To enable Dial Tone Detection for speed dialing and redialing:
At the System Manager’s extension, lift the handset and enter “7840”.
Pause for con
fi
rmation tone.
To disable Dial Tone Detection and use the speed dial delay time:
At the System Manager’s extension, lift the handset and enter “7841”.
Pause for con
fi
rmation tone.
7840
7841
Assigning Speed Dial Numbers
Chapter
3
- Functions Of IPS System
