28
Entering The Programming Mode Password
If you are required to input a password to enter the programming mode, the following password
command will be used.
2.
Enter the 6-digit password (Default = “123456”).
Pause for con
fi
rmation tone.
Changing The Programming Mode Password
If you are requiring the System Manager to input a password to enter the programming mode, you
may change the password if, for security reasons, you do not want unauthorized people changing
the system settings. The default value of the password is ‘123456’. To change the value:
1.
At the System Manager’s extension, lift the handset and enter “761”.
4.
Pause for con
fi
rmation tone.
Hang up or continue programming.
1.
At the System Manager’s extension, lift the handset and enter “761”.
Followed by the current 6-digit password (Default = ‘123456’).
Pause for con
fi
rmation tone.
2.
Enter “762”.
3.
Enter the new 6-digit password.
Then enter the new 6-digit password again.
761
“Password”
761
762
“Password”
Preparing To Program
Chapter
3
- Functions Of IPS System
