52
Enabling The Voice Announcement
For an outside line operating in the DISA mode, the voice announcement module may be enabled
or disabled. Some hardware models do not have the voice announce module. This parameter must
be enabled to allow the IPS to play the voice announcement. If the voice announcement module is
not enabled, the incoming caller will hear silence after the IPS answers the call in the DISA mode.
7806
7807
To enable the Voice Announcement Module:
In the programming mode, lift the handset, enter “7806”.
Pause for con
fi
rmation tone.
To disable the Voice Announcement Module:
In the programming mode, lift the handset, enter “7807”.
Pause for con
fi
rmation tone.
Setting The Length Of The DISA Input Time
The length of the Voice Announcement recording is
fi
xed at 20 seconds. The length of time that
the system waits for the incoming caller to make a choice can be set at 25 seconds or 75 seconds
if the Voice Announcement module is enabled or it can be set at 6 seconds or 12 seconds if the
voice announcement module is not enabled.
To set the DISA input time at 75 seconds or 12 seconds:
In the programming mode, lift the handset, enter “7812”.
Pause for con
fi
rmation tone.
To set the DISA input time at 25 seconds or 6 seconds:
In the programming mode, lift the handset, enter “7813”.
Pause for con
fi
rmation tone.
7812
7813
Auto-Attendant (DISA) Feature
Chapter
3
- Functions Of IPS System
