92
7860
To report incoming DISA digits to the CAT Applications:
In the programming mode, lift the handset and enter “7860”.
Pause for the con
fi
rmation tone. Hang up or continue programming.
To enable the normal mode of DISA Operation:
In the programming mode, lift the handset and enter “7861”.
Pause for the con
fi
rmation tone. Hang up or continue programming.
7861
Report DISA Digits To The CAT Application
The CAT software can be con
fi
gured to send a message to the CAT application as each digit is
entered by an incoming caller to an outside line con
fi
gured to operate in the DISA mode. In this
mode, the IPS will not try to interpret the digits entered. It will not cause the call to ring at any
extension. The CAT application would typically process the digits entered and send a command
to the IPS causing the incoming call to ring at a speci
fi
ed extension.
Chapter
3
- Functions Of IPS System
Interfacing The IPS To A Computer
