101
Multiple Ringing Time
For incoming calls to outside lines operating in the Standard Incoming Calls mode, this is
number of rings that the
fi
rst available extension will ring before the IPS starts to ring up to three
additional extensions.
16.
Enter the “multiple ringing time” code. Enter a “0” to “9” to specify
zero to nine rings. The default value is “4” rings.
Parked Calls Timing
When an outside call is parked at another extension, this setting determines the amount of time
the IPS will wait for the parked extension to become available before the IPS attempts to ring the
Operator or a Rollover Extension.
17.
Enter the “Parked Calls Timing” code. This parameter sets the time
f or outside calls parked to an extension.
0
25 seconds
1
50 seconds
*
2
175 seconds
3
300 seconds
4
425 seconds
5
550 seconds
6
675 seconds
7
800 seconds
8
925 seconds
9
5 seconds
18.
Pause for the con
fi
rmation tone. Hang up or continue programming.
Chapter
3
- Functions Of IPS System
System Timing Parameters
