Avaya WLAN 8100 Series, Reference, Page: 195 / 382

Related RADIUS Commands
About this task
During the process of configuring RADIUS authentication, there are three other CLI commands
that can be useful to the process. These commands are:
Procedure
1. show radius-server
The command takes no parameters and displays the current RADIUS server
configuration.
2. no radius-server
This command takes no parameters and clears any previously configured RADIUS
server settings.
3. radius-server password fallback
This command takes no parameters and enables the password fallback RADIUS
option if it was not done when the RADIUS server was configured initially.
Configuring system security
About this task
The following sections describe the methods and procedures necessary to configure system
security.
Depending on the scope and usage of the commands you can use different command modes
to execute them.
Related topics:
Configuring RADIUS on page 192
Configuring MAC address-based security using CLI on page 196
SNMP configuration using CLI on page 206
Configuring using CLI on page 222
Configuring IP Manager using CLI on page 225
Configuring password security using CLI on page 227
Configuring Avaya Secure Network Access Options on page 229
Displaying CLI Audit log using CLI on page 229
Enabling Audit Log Save Settings on page 230
Configuring Secure Socket Layer services using CLI on page 230
Configuring Secure Shell protocol using CLI on page 231
ACLI reference for wired networks
Avaya WLAN 8100 CLI Reference August 2013 195