ageout Configure WIDS ageout timers
known-ap Create/Modify an AP known to WIDS.
rogue-ap Change rogue AP parameters
rogue-client Change rogue client parameters
WCP8180(config-security)#wips ?
Configure Wireless Intrusion Protection
mitigation Configure Threat Mitigation
Use the following commands to configure WIDS — WIPS.
Before you begin
To execute the following commands, you must be in one of the following CLI configuration
modes.
• Wireless security configuration mode:
Execute the following commands:
WC8180#conf t
WC8180(config)wireless#
WC8180#(config-wireless)#security
WC8180#(config-security)#
• Wireless radio profile configuration mode:
Execute the following commands:
WC8180#conf t
WC8180(config)wireless#
WC8180#(config-wireless)#radio-profile <radio-profile number>
For example:
WC8180(config-wireless)#radio-profile 1
Entering radio-profile (id = 1) configuration mode...
WC8180(config-radio-profile)#
Procedure
1. Enable detection of
Rogue AP
threats.
Use one of the following command options to enable detection of specific Rogue
AP threats.
WCP8180(config-security)#wids rogue-ap threat ?
fake-ap-on-invalid-channel Fake AP operating on illegal channel
illegal-channel AP operating on illegal channel
invalid-ssid-from-managed-ap Managed AP using invalid SSID
known-standalone-ap-cfgerr Standalone AP with unexpected
configuration
managed-ssid-rcvd-from-fake-ap Fake AP detected with managed SSID
managed-ssid-rcvd-from-unknown-ap Unknown AP using managed SSID
managed-ssid-with-invalid-security AP using invalid security on managed
SSID
no-ssid-rcvd-from-ap AP with no SSID
unexpected-wids-device Unexpected WDS device
unmanaged-ap-on-wired-net Unmanaged AP detected on wired network
ACLI reference for Wireless LAN (WLAN) 8100
102 Avaya WLAN 8100 CLI Reference
August 2013