Parameter
Description
security-lists
Displays port membership of all security
lists.
The
show mac-security
command is executed in the Privileged EXEC command mode.
show mac-security mac-da-filter command
The
show mac-security mac-da-filter
command displays configuration information
for filtering MAC destination addresses (DA). Packets can be filtered from up to 10 MAC
DAs.
The syntax for the
show mac-security mac-da-filter
command is
show mac-security mac-da-filter
The
show mac-security mac-da-filter
command is executed in the Privileged EXEC
command mode.
The
show mac-security mac-da-filter
command has no parameters or variables.
mac-security command
The
mac-security
command modifies the MAC security configuration.
The
mac-security
command is executed in the Global Configuration mode.
CLI reference:
WCP8180(config)#mac-security ?
auto-learning Configure MAC Auto-Learning
disable Disable MAC Address Security.
enable Enable MAC Address Security.
filtering Enable/disable DA filtering
intrusion-detect Enable/disable partitioning on intrusion detection
intrusion-timer Set temporary partition time for intrusion detection.
learning Enable/disable MAC address learning
learning-ports Modify ports participation in MAC address learning.
mac-address-table Add addresses to MAC security address table
mac-da-filter Add/delete MAC DA filtering addresses
security-list Modify security list port membership.
snmp-lock Enable/disable SNMP lock on MAC address security parameters.
The following table outlines the parameters for this command.
Table 43: mac-security parameters
Parameter
Description
auto-learning
Configure MACE auto-learning
disable|enable
Disables or enables MAC address-based
security.
filtering {enable|disable}
Enables or disables DA filtering on intrusion
detected.
ACLI reference for wired networks
Avaya WLAN 8100 CLI Reference
August 2013 197