Avaya WLAN 8100 Series, Reference, Page: 155 / 382

Note:
The accuracy margin of cable length diagnosis is between three to five meters. Avaya
suggests the shortest cable for length information be five meters long.
Use the following CLI commands to initiate a TDR cable diagnostic test and obtain test
reports.
Related topics:
tdr test command on page 155
show tdr command on page 155
tdr test command
The
tdr test
command initiates a TDR test on a port or ports.
The syntax for this command is:
tdr test <portlist>
where <portlist> specifies the ports to be tested.
The
tdr test
command is in the privExec command mode.
show tdr command
The
show tdr
command displays the results of a TDR test.
The syntax for this command is:
show tdr <portlist>
where
<portlist>
specifies the ports for which to display the test results.
The
show tdr
command is in the privExec command mode.
Enabling Autotopology
About this task
The Optivity Autotopology protocol can be configured using the CLI.
Use the following commands to enable autotopology using the CLI.
Related topics:
autotopology command on page 155
no autotopology command on page 156
default autotopology command on page 156
show autotopology settings command on page 156
show autotopology nmm-table command on page 156
autotopology command
The
autotopology
command enables the Autotopology protocol.
The syntax for the
autotopology
command is:
autotopology
The
autotopology
command is executed in the Global Configuration command mode.
ACLI reference for wired networks
Avaya WLAN 8100 CLI Reference August 2013 155