Avaya WLAN 8100 Series, Reference, Page: 164 / 382

Clock sync rtc-with-SNTP enable command on page 164
no clock sync-rtc-with-SNTP enable command on page 164
Default clock sync-rtc-with-SNTP enable command on page 164
Clock source command on page 164
default clock source command on page 165
clock set command
This command is used to set the RTC. The syntax of the
clock set
command is:
clock
set {<LINE> | <hh:mm:ss>}
The following table outlines the parameters for this command.
Table 19: clock set command parameters
Parameters Description
<LINE> A string in the format of mmddyyyyhhmmss that
defines the current local time.
<hh:mm:ss> Numeric entry of the current local time in the manner
specified.
This command is executed in the Privileged EXEC command mode.
Clock sync rtc-with-SNTP enable command
This command enables the synching of the RTC with the SNTP clock when the SNTP clock
synchronizes.
The syntax for this command is:
clock sync-rtc-with-sntp enable
This command is executed in the Global Configuration command mode.
no clock sync-rtc-with-SNTP enable command
This command disables the synching of the RTC with the SNTP clock when the SNTP clock
synchronizes.
The syntax for this command is:
no clock sync-rtc-with-sntp enable
This command is executed in the Global Configuration command mode.
Default clock sync-rtc-with-SNTP enable command
This command sets the synchronizing of the RTC with the SNTP clock to factory defaults.
The syntax for this command is:
default clock sync-rtc-with-sntp enable
This command is executed in the Global Configuration command mode.
Clock source command
This command sets the default clock source for the switch.
ACLI Reference for wired networks
164 Avaya WLAN 8100 CLI Reference August 2013
Comments? infodev@avaya.com