Avaya WLAN 8100 Series, Reference, Page: 335 / 382

Note: An action cannot be deleted if referenced by a policy, classifier block, or meter.
Procedure
Delete QoS action entries by using the following command from Global Configuration
mode.
no qos action <10-55000>
Configuring QoS Interface Action Extensions
About this task
QoS interface action extensions direct the WC 8180 to take specific action on each packet.
Related topics:
Creating interface action extension entries on page 335
Removing interface action extension entries on page 336
Creating interface action extension entries
About this task
Use the following procedure to create interface action extension entries.
Note: An interface extension that is referenced in an action entry cannot be deleted.
Procedure
1. Create interface action extension entries by using the following command from
Global Configuration mode.
qos if-action-extension <1-55000> [name <WORD>] {egress-ucast
<port> | egress-non-ucast <port>}
2. View the interface action extension entries by using the following command:
show qos if-action-extension <1–65535> [all] [system] [user]
Variable definitions
Variable Value
<1-55000> Specifies the QoS action. The range is 1–55000
name <WORD> Assigns a name to a QoS action with the designated
action ID. Enter the name for the action; maximum is
16 alphanumeric characters
egress-ucast <port> | egress-non-
ucast <port> Specifies redirection of unicast/non-unicast to
specified port.
session-id Specifies the session id for QoS action.
ACLI reference for wired networks
Avaya WLAN 8100 CLI Reference August 2013 335