Avaya WLAN 8100 Series, Reference, Page: 219 / 382

The syntax for the
snmp-server view
command is:
snmp-server view <view-name> <OID> [<OID> {<OID> [<OID> [<OID> [<OID>
[<OID> [<OID> [<OID> [<OID>]]]]]]]]]
The
snmp-server view
command is executed in the Global Configuration mode.
The following table describes the parameters for this command.
Table 61: snmp-server view command parameters
Parameters Description
viewname Specifies the name of the new view; enter an
alphanumeric string.
OID Specifies Object identifier. OID can be entered as
a dotted form OID. Each OID must be preceded by
a + or - sign (if this is omitted, a + sign is implied).
The + is not optional.
For the dotted form, a sub-identifier can be an
asterisk, indicating a wildcard. Here are some
examples of valid OID parameters:
• sysName
• +sysName
• -sysName
• +sysName.0
• +ifIndex.1
• -ifEntry..1 (this matches all objects in the ifTable
with an instance of 1; that is, the entry for interface
#1)
• 1.3.6.1.2.1.1.1.0 (the dotted form of sysDescr)
The + or - indicates whether the specified OID is
included in or excluded from, the set of MIB objects
accessible using this view.
There are 10 possible OID values.
no snmp-server view command
The
no snmp-server view
command deletes the specified view.
The syntax for the
no snmp-server view
is:
no snmp-server view <viewname>
The
no snmp-server view
is executed in the Global Configuration mode.
The following table describes the parameters for this command.
ACLI reference for wired networks
Avaya WLAN 8100 CLI Reference August 2013 219