Use the following command to disable detection of a specific rogue AP threat. For
example, the following command disables the detection of the
illegal-
channel
rogue AP threat.
WCP8180(config-security)#no wids rogue-ap threat illegal-channel
Use the following command to disable detection of all rogue AP threats.
WCP8180(config-security)#no wids rogue-ap threat
Use the following command to set the default for a specific rogue AP threat.
Detection of a threat is
enabled
by default.
For example, the following command sets the default for the
illegal-channel
threat, which is to
enable
its detection.
WCP8180(config-security)#default wids rogue-ap threat illegal-channel
To set the defaults for all threats, enter:
WCP8180(config-security)#default wids rogue-ap threat
2. Enable detection of
Rogue Client
threats.
Use one of the following command options to enable detection of specific client
threats.
WCP8180(config-security)# wids rogue-client threat ?
assoc-unknown-ap Enable known client associating to unknown AP test
auth-failure Configure authentication failure test
auth-req-rate Configure authenticaion request rate test
deauth-req-rate Configure deauthentication request rate test
not-in-db Enable client check in known database test
probe-req-rate Configure probe request rate test
<cr>
Use the following commands to configure options within the
auth-failure
threat.
WCP8180(config-security)# wids rogue-client threat auth-failure ?
threshold Set authentication failure threshold
<cr>
Use the following commands to configure options within the
auth-req-rate
threat.
WCP8180(config-security)# wids rogue-client threat auth-req-rate ?
interval Set interval for calculating rate
threshold Set threshold for calculating rate
<cr>
Use the following commands to configure options within the
deauth-req-rate
threat.
WCP8180(config-security)# wids rogue-client threat deauth-req-rate ?
interval Set interval for calculating rate
threshold Set threshold for calculating rate
<cr>
Use the following commands to configure options within the
probe-req-rate
threat.
WCP8180(config-security)# wids rogue-client threat probe-req-rate ?
interval Set interval for calculating rate
ACLI reference for the Wireless LAN (WLAN) 8100
Avaya WLAN 8100 CLI Reference
August 2013 103