Avaya WLAN 8100 Series, Reference, Page: 326 / 382

Procedure
1. Configure priority values by using the following command from Global Configuration
mode.
qos queue-set-assignment queue-set <1-56> 1p <0-7> queue
<1-8>
2. View the priority values by using the following command:
show qos queue-set-assignment queue-set
Example
WCP8180(config)# show qos queue-set-assignment queue-set 1
Queue Set 1
802.1p Priority Queue
_______________ _____
0 1
1 1
2 1
3 1
4 1
5 1
6 1
7 1
Variable Definitions
Variable Value
queue-set <1-56> Specifies the queue-set, value ranges from 1–56.
1p <0-7> Specifies the 802.1p priority value for which the queue
association is being modified; value ranges from 0–7.
queue <1-8> Specifies the queue within the identified queue set to assign the
802.1p priority traffic at egress, value ranges from 1–8.
Configuring QoS Interface Groups
Use the CLI commands in this section to add or delete ports to or from an interface group, or
add or delete the interface groups themselves.
Related topics:
Configuring ports for an interface group on page 327
Removing ports from an interface group on page 327
Creating an interface group on page 327
Removing an interface group on page 328
ACLI Reference for wired networks
326 Avaya WLAN 8100 CLI Reference August 2013
Comments? infodev@avaya.com