Avaya WLAN 8100 Series, Reference, Page: 256 / 382

Variable Definitions
Variable Value
port <portlist> Enables spanning tree for the specified port or ports;
enter port or ports to be set to factory spanning tree
default values.
Note: If this parameter is omitted, the system uses
the port number specified when the interface
command was used to enter Interface Configuration
mode.
stp <1-8> Specifies the Spanning Tree Group to set to factory
default values; enter the STG ID. This command
places the port into the default STG. The default
value for STG is 1.
learning Sets the spanning tree learning mode to the factory
default value.
The default value for learning is Normal mode.
cost Sets the path cost to the factory default value.
The default value for path cost depends on the type
of port.
priority Sets the priority to the factory default value.
The default value for the priority is 0x8000.
Managing RSTP using the CLI
About this task
Use the following command to configure RSTP:
• Configuring RSTP parameters on page 256
• Configuring RSTP on a port on page 258
• Displaying RSTP configuration on page 258
• Displaying RSTP port configuration on page 257
Configuring RSTP parameters
About this task
Use the following procedure to set the RSTP parameters which include forward delay, hello
time, maximum age time, default path cost version, bridge priority, transmit holdcount, and
version for the bridge.
Procedure
To configure RSTP parameters, use the following command from Global Configuration
mode.
spanning-tree rstp [ forward-time <4-30>] [hello-time <1-10>]
[max-age <6-40>] [pathcost-type {bits16 | bits32}] [priority
ACLI Reference for wired networks
256 Avaya WLAN 8100 CLI Reference August 2013
Comments? infodev@avaya.com