manualshive.com logo in svg

Avaya WLAN 8100 Series, Reference, Page: 54 / 382

Share
Download
Avaya WLAN 8100 Series Reference Download Page 54

Configure Auto-RF channel plan history depth:

WC8180(config-wireless)#auto-rf channel-plan a-n history-depth ?

  <0-10>  Number of channel-plan iterations to be saved

WC8180(config-wireless)#auto-rf channel-plan bg-n history-depth ?

  <0-10>  Number of channel-plan iterations to be saved

Configure the Auto-RF channel plan interval:

WC8180(config-wireless)#auto-rf channel-plan a-n interval ?

  <1-24>  Channel adjustment interval in hours

WC8180(config-wireless)#auto-rf channel-plan bg-n interval ?

  <1-24>  Channel adjustment interval in hours

Configure the Auto-RF channel plan mode:

WC8180(config-wireless)#auto-rf channel-plan a-n mode ?

  interval  Adjusting channels at regular interval

  manual    Adjusting channels manually

  time      Adjusting channels at a scheduled time

WC8180(config-wireless)#auto-rf channel-plan bg-n mode ?

  interval  Adjusting channels at regular interval

  manual    Adjusting channels manually

  time      Adjusting channels at a scheduled time

Auto-RF power plan configuration

Configure Auto-RF power plan at the domain level:

WC8180(config-wireless)#auto-rf power-plan ?

  mode                Set power plan mode

  threshold-strength  Configure the threshold strength in dBm to be used for

                      the power adjustements

Configure the Auto-RF power plan mode:

 Note:

Auto-RF power plan has the following modes:

• Auto
• Manual

The default power plan mode is 

Auto

.

AMDC(config-wireless)#auto-rf power-plan mode ?

  auto    Adjusting power automatically

  manual  Adjusting power manually

Configure Auto-RF power plan threshold strength in 

dBm

:

WC8180(config-wireless)#auto-rf power-plan threshold-strength ?

  <-99 - -1>  Enter the power plan strength in dBm(-1 to -99)

Procedure

1. Enter Wireless Configuration mode of the CLI.

2. Use the 

command auto-rf channel-plan {a-n | bg-n} history-depth

<0 - 10>

 to set the number of saved historical channel plans.

ACLI reference for Wireless LAN (WLAN) 8100

54     Avaya WLAN 8100 CLI Reference

August 2013

Comments? [email protected]

Summary of Contents for WLAN 8100 Series































































































































































































































































































































































































Reviews:

No comments