Avaya WLAN 8100 Series, Reference, Page: 329 / 382

Procedure
1. Configure priority by using the following command from Global Configuration
mode.
qos egressmap [name <WORD>] ds <0-63> 1p <0-7> dp <low-drop |
high-drop>
2. View the configured egress map details by using the following command:
show qos egressmap
Example
WCP8180(config)# show qos egressmap
DSCP 802.1p Priority Drop Precedence New DSCP Name
____ _______________ _______________ ________ ________________
0 0 High Drop 0 Standard Service
1 0 High Drop 1 Standard Service
2 0 High Drop 2 Standard Service
3 0 High Drop 3 Standard Service
4 0 High Drop 4 Standard Service
5 0 High Drop 5 Standard Service
6 0 High Drop 6 Standard Service
7 0 High Drop 7 Standard Service
8 2 High Drop 8 Bronze Service
9 0 High Drop 9 Standard Service
10 2 Low Drop 10 Bronze Service
11 0 High Drop 11 Standard Service
12 2 High Drop 12 Bronze Service
13 0 High Drop 13 Standard Service
14 2 High Drop 14 Bronze Service
15 0 High Drop 15 Standard Service
16 3 High Drop 16 Silver Service
17 0 High Drop 17 Standard Service
18 3 Low Drop 18 Silver Service
19 0 High Drop 19 Standard Service
20 3 High Drop 20 Silver Service
Variable Definitions
Variable Value
name <WORD> Specifies the label for the egress mapping.
ds <0-63> Specifies the DSCP value used as a lookup key for 802.1p
priority and drop precedence at egress when appropriate; range
is between 0 and 63.
1p <0-7> Specifies the 802.1p priority value associated with the DSCP;
range is between 0 and 7.
dp <low-drop | high-drop> Specifies the drop precedence values associated with the
DSCP:
• low-drop
• high-drop
ACLI reference for wired networks
Avaya WLAN 8100 CLI Reference August 2013 329