Avaya WLAN 8100 Series, Reference, Page: 250 / 382

Configuring STP values on page 252
Restoring default Spanning Tree values on page 253
Adding a VLAN to a STG on page 254
Removing a VLAN from a STG on page 254
Configuring STP and MSTG participation on page 254
Resetting Spanning Tree values for ports to default on page 255
Managing RSTP using the CLI on page 256
Configuring path cost calculation mode
About this task
Use the following procedure to set the path cost calculation mode for all Spanning Tree Groups
on the switch.
Procedure
To configure path cost calculation mode, use the following command from Privileged
EXEC mode.
spanning-tree cost-calc-mode {dot1d | dot1t}
Configuring STG port membership mode
About this task
Use the following procedure to set the STG port membership mode for all Spanning Tree
Groups on the switch.
Procedure
To configure STG port membership mode, use the following command from Privileged
EXEC mode.
spanning-tree port-mode {auto | normal}
Displaying STP configuration information
About this task
Use the following procedure to display spanning tree configuration information that is specific
to either the Spanning Tree Group or to the port.
Procedure
To display STP configuration information, use the following command from Privileged
EXEC mode.
show spanning-tree [stp <1-8>] {config | port| port-mode |
vlans}
ACLI Reference for wired networks
250 Avaya WLAN 8100 CLI Reference August 2013
Comments? infodev@avaya.com