Procedure
To enable a Spanning Tree Group, use the following command from Global
Configuration mode.
spanning-tree stg <1-8> enable
Disabling a Spanning Tree Group
About this task
Use the following procedure to disable a Spanning Tree Group.
Procedure
To disable a Spanning tree Group, use the following command from Global
Configuration mode.
spanning-tree stp <1-8> disable
Configuring STP values
About this task
Use the following procedure to set STP values by STG.
Procedure
To configure STP values, use the following command from Global Configuration
mode.
spanning-tree [stp <1-8>] [forward-time <4-30>] [hello-time
<1-10>] [max-age <6-40> [priority {0*0000 | 0*1000| 0*2000 |
0*3000 | ... | 0*E000 | 0*F000}] [tagged-bpdu {enable |
disable}] [tagged-bpdu-vid >1-4094>] [multicast-address
<H.H.H>] [add-vlan] [remove-vlan]
Variable Definitions
Variable
Value
stp <1-8>
Specifies the Spanning Tree Group; enter
the STG ID.
forward-time <4-30>
Enter the forward time of the STG in
seconds; the range is 4 -- 30, and the default
value is 15.
hello-time <1-10>
Enter the hello time of the STG in seconds;
the range is 1 --10, and the default value is
2.
ACLI Reference for wired networks
252 Avaya WLAN 8100 CLI Reference
August 2013