Avaya WLAN 8100 Series, Reference, Page: 227 / 382

The command sets both the IP address and mask for the specified entry to 255.255.255.255
for Ipv4 entries. If you do not specify a
<list ID>
value, the command resets the whole list
to factory defaults.
Viewing IP Manager settings
About this task
To view IP Manager settings, use the following command in any mode:
show ipmgr
The command displays
• whether Telnet, SNMP, SSH, and Web access are enabled
• whether the IP Manager list is being used to control access to Telnet, SNMP, SSH, and
Web-based management system
• the current IP Manager list configuration
Configuring password security using CLI
About this task
Use the following CLI commands to manage password security features. These commands
can be used in the Global Configuration and Interface Configuration command modes.
Related topics:
Enabling password security on page 227
Disabling password security on page 227
Creating user names and passwords on page 228
Configuring password retry attempts on page 228
Configuring password history on page 228
Defaulting password history on page 228
Displaying password history settings on page 228
Enabling password security
About this task
The
password security
command enables the Password Security feature on the WLAN
8100 Series.
The syntax of the
password security
command is
password security
Disabling password security
The
no password security
command disables the Password Security feature on the
WLAN 8100 Series.
ACLI reference for wired networks
Avaya WLAN 8100 CLI Reference August 2013 227