Avaya P332G-ML, User Manual

Page: 40 / 254

Chapter 2 Avaya P334T-ML Front and Rear Panels
22
P334T-ML
User’s Guide
FDX Full Duplex mode
ON – Full duplex mode (ports 1-48)
OFF – Half duplex mode (ports 1-48)
Always ON for ports 51,52 (full-duplex mode
only)
FC Flow Control
OFF – No flow control.
ON – One of the three possible flow control
modes is
enabled .
Note: FC LED for Gigabit Ethernet ports
reflect the last negotiated mode when
autonegotiation is enabled and the link is
down.
Hspd High Speed Ports 1-48 Ports 51,52
OFF: 10 Mbps N/A
ON: 100 Mbps 1000 Mbps
LAG
Link Aggregation
Group (Trunking)
OFF – No LAG defined for this port
ON – Port belongs to a LAG
Table 2.2 Avaya P334T-ML <- -> Select buttons
Description Function
Left/Right Individual – select LED function (see table above)
Reset module Press both right and left buttons together for approximately 2
seconds. All LEDs on module light up until buttons are
released.
Reset stack Press both Right and Left buttons together for 4 seconds. All
LEDs on stack light up until buttons are released.
Table 2.1 Avaya P334T-ML LED Descriptions (Continued)
LED Name Description LED Status