Avaya P332G-ML, User Manual

Page: 150 / 254

Chapter 6 CLI – Layer 2
132 Avaya P334T-ML User’s Guide
Note: If you wish to define a string which includes spaces, you must enclose the
entire string in quotation marks, e.g. "new york".
set allowed managers
Use the
set allowed managers
command to enable/disable the Allowed
Managers feature. When this feature is enabled, only those stations whose IP
addresses are listed in the Allowed Managers table can access the device over
Telnet, SNMP, or HTTP.
The syntax for this command is:
set allowed managers [enabled|disabled]
Output Example:
P330-N> set allowed managers enabled
Managers are enabled
set allowed managers IP
Use the
set allowed managers IP
command to add or remove an IP address
from the Allowed Managers table. The Allowed Managers table can contain up to
twenty IP addresses.
The syntax for this command is:
set allowed managers ip [add|delete][IP address]
Output Example:
P330-N> P330-1(super)# set allowed managers ip add
149.49.32.134
Ip was added to the table
Note: The Allowed Managers feature will not operate correctly if the IP address
specified with the
set allowed managers IP
command is changed before it
reaches the switch (as a result of NAT.proxy cache, etc.).
set psu type
Use the
set psu type
command to set the main power supply type (AC/DC) of