Avaya P332G-ML, User Manual

Page: 145 / 254

Chapter 6 CLI – Layer 2
Avaya P334T-ML User’s Guidee 127
Output Example:
P330-N# set autopartition enable 3
Auto-partition is enabled in module 3.
set license
The
set license
command enables you to activate the SMON/routing
capability of the Avaya P330 stack. An Avaya P330 stack can include several Avaya
P330 switches. One SMON license is required per Avaya P330 stack. A routing
license is required for each P330-ML module in the stack.
For a full description of the SMON/routing License and the installation procedure
please refer to the Installation Guide provided with the SMON/routing License.
The syntax for this command is:
set license
[module] [license] [featureName]
Example:
P330-N> set license 1 021 1ad bad ca5 8d2 ccd smon
set ppp authentication incoming
Use the
set ppp authentication incoming
command to define the
authentication method used for a PPP server or client session.
The syntax for this command is:
set ppp authentication incoming {pap|chap|none}
Example:
P330-N(super)# set ppp authentication incoming chap
module The switch number
license The license number
featureName The name of the feature, either
smon
or
routing
pap PAP authentication method
chap CHAP authentication method
none No authentication