Avaya P332G-ML, User Manual

Page: 135 / 254

Chapter 6 CLI – Layer 2
Avaya P334T-ML User’s Guidee 117
The syntax for this command is:
set port classification [module/port] {regular | valuable}
Output Example:
P330-1(super)# set port classification 2/19 valuable
Port 2/19 classification has been changed.
set port redundancy
Use the
set port redundancy
command to define/delete port redundancy
schemes between a Primary and a Secondary link. There should not be any
redundancy scheme already defined on any of the links.
The syntax for this command is:
set port redundancy <mod_num>/<prim_port_num> <mod_num>/
<second_port_num> {on/off} [<redundancy_name>]
Output Example:
P330-N# set port redundancy 1/7 2/12 on red1
uplink: Port 2/12 is redundant to port 1/7.
Port redundancy is active - entry is effective immediately
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
set port redundancy
Use the
set port redundancy
commands to activate or disable all defined port
redundancy schemes within the stack. This command will not delete existing port
redundancy entries. A port redundancy scheme is removed once the switch
containing either its primary or secondary ports is removed from the stack.
module port switch/port range
regular | valuable port classification
prim_port_num Primary link of the redundancy scheme
second_port_num Secondary link of the redundancy scheme
redundancy_name Name for the redundancy scheme (optional)