manualshive.com logo in svg

Autodesk AUTOSKETCH 8, User Manual

Share
Download
Autodesk AUTOSKETCH 8 User Manual Download Page 202

192

|

Chapter 15

3D Effects

■

Selecting As Lines causes AutoSketch to draw the extrusion as a group of 
individual lines, creating a more open appearance than As Polygons. This 
option can be useful if you plan to further edit the extrusion entity.

■

Selecting As Polygons causes AutoSketch to draw the extrusion as a group 
of polygons. This allows you to apply solid fill.

To change the way extrusion entities are rendered

1

Click the 3D Effects button on the Standard toolbar. The 3D Effects toolbar 
appears.

2

Click the 3D Effects Options button on the 3D Effects toolbar. The 
3D Effects Options dialog box appears.

3

In the Render section, click either Wireframe or Hidden Line. 

4

In the Render section, click either As Lines or As Polygons.

5

Click OK.

Summary of Contents for AUTOSKETCH 8

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands