manualshive.com logo in svg

Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010, User Manual

Share
Download
Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual Download Page 532

Or you can right-click a material in the list, and click Duplicate.

3

In the Duplicate Revit Material dialog, for Name, enter a name for the new material, and click
OK.

4

On the Graphics tab of the Materials dialog, specify display properties for the new material, and
click Apply.

See 

Changing the Display Properties of a Material

 on page 473.

5

On the Render Appearance tab of the Materials dialog, specify a render appearance for the new
material, and click Apply.

See 

Changing the Render Appearance of a Material

 on page 475.

6

On the Identity tab of the Materials dialog, enter information about the new material, and click
Apply.

See 

Changing Material Identity Data

 on page 487 and 

Adding a Material Class

 on page 487.

7

(Optional) On the Physical tab of the Materials dialog, specify physical parameters for the new
material, and click Apply.

See 

Changing Material Physical Data

 on page 488.

8

To exit the Materials dialog, click OK.

See 

Applying Materials to Elements

 on page 471.

Renaming a Material

1

Click Manage tab

 ➤ 

Project Settings panel

 ➤ 

Materials.

2

In the Materials dialog, select the material to rename.

See 

Searching for a Material

 on page 470.

3

At the bottom of the left pane of the Materials dialog, click 

 (Rename).

Or you can right-click a material in the list, and click Rename.

4

In the Rename dialog, enter a new name for the material, and click OK.

5

In the Materials dialog, click Apply.

Deleting a Material

1

Click Manage tab

 ➤ 

Project Settings panel

 ➤ 

Materials.

2

In the Materials dialog, select the material to delete.

See 

Searching for a Material

 on page 470.

3

At the bottom of the left pane of the Materials dialog, click 

 (Delete).

Or you can right-click a material in the list, and click Delete.

4

At the confirmation prompt, click Yes.

Revit Architecture deletes the material from the project. If the material was applied to elements in the
building model, Revit Architecture applies a default material to them instead.

490 | Chapter 10   Customizing Project Settings

Summary of Contents for 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands