manualshive.com logo in svg

Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010, User Manual

Share
Download
Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual Download Page 370

1

In the drawing area, select the revolve.

2

If you are in the project environment:

a

On the Modify <Element> tab

 ➤ 

Family panel, click Edit Family.

b

Click Yes to open the family for editing.

c

In the Family Editor, select the revolve in the drawing area again.

3

On the Modify Revolve tab

 ➤ 

Edit panel

 ➤ 

click Edit Sketch.

4

If desired, modify the revolve sketch.

5

To edit other revolve properties, on the Edit Revolve tab

 ➤ 

Element panel, click Revolve

Properties, and change the start and end points, visibility, material, or subcategory.

6

To change the revolve to a solid or a void, under Identity Data, for Solid/Void, select Solid or
Void.

7

Click OK.

8

On the Revolve panel, click Finish Revolve.

Creating a Sweep

For information about using sweeps in families, see 

The Families Guide

 on page 418.

A sweep is a tool for creating families that requires you to sketch or apply a profile (shape) and extrude that
profile along a path. You might use a sweep to create moldings, railings, or simple pipes.

The following procedure is a general method for creating a sweep. Steps may vary depending on your design
intent.

To create a solid or void sweep

1

In the Family Editor, on the Create tab

 ➤ 

Forms panel, do one of the following.

■

Click Solid drop-down

 ➤ 

Sweep.

■

Click Void drop-down

 ➤ 

Sweep.

NOTE

If necessary, set the work plane before you sketch the sweep. Click Create tab

 ➤ 

Work Plane

panel

 ➤ 

Set.

2

Specify the sweep path:

■

To sketch a new path for the sweep, on the Create Sweep tab

 ➤ 

Mode panel, click Sketch

Path.
The path can either be a single closed or single open path. You cannot have multiple paths.
The path can be a combination of straight lines and curves, and it need not be planar.

■

To select an existing line for the sweep, on the Create Sweep tab

 ➤ 

Mode panel, click Pick

Path.
You can select edges of other solid geometry, such as extrusions or blends, or you can pick
existing sketch lines. Watch the status bar to know what you are picking. This method of
picking automatically locks the sketch lines to the geometry you are picking and allows you
to sketch the path in multiple work planes, hence allowing for a 3D path.

3

Sketch or pick the path, and then on the Path panel, click Finish Path.

328 | Chapter 7   Sketching

Summary of Contents for 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands