manualshive.com logo in svg

Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010, User Manual

Share
Download
Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual Download Page 945

Description

Name

A label created for the brace. Possible use: shop mark. This value must be
unique for each brace in a project. Revit Architecture warns you if the number

Mark

is already used but allows you to continue using it. You can see the warning
using the Review Warnings tool. See 

Reviewing Warning Messages

 on page

1415.

Phasing

Indicates in which phase the brace component was created. See 

Project

Phasing

 on page 1331.

Phase Created

Indicates in which phase the brace component was demolished. See 

Project

Phasing

 on page 1331.

Phase Demolished

Structural Analysis

Specifies the start release condition: either Fixed, Pinned, Bending Moment,
or User Defined. User Defined allows you to enable/disable each of the start
release conditions.

Start Release

The translational release at the start end of the brace along the local x-axis.

Start Fx

The translational release at the start end of the brace along the local y-axis.

Start Fy

The translational release at the start end of the brace along the local z-axis.

Start Fz

The rotational release at the start end of the brace along the local x-axis.

Start Mx

The rotational release at the start end of the brace along the local y-axis.

Start My

The rotational release at the start end of the brace along the local z-axis.

Start Mz

Specifies the end release condition: either Fixed, Pinned, Bending Moment
or User Defined. User Defined allows you to enable/disable each of the end
release conditions.

End Release

The translational release at the end of the brace along the local x-axis.

End Fx

The translational release at the end of the brace along the local y-axis.

End Fy

The translational release at the end of the brace along the local z-axis.

End Fz

The rotational release at the end of the brace along the local x-axis.

End Mx

The rotational release at the end of the brace along the local y-axis.

End My

The rotational release at the end of the brace along the local z-axis.

End Mz

Used by external analysis applications to determine whether brace conditions
contribute to lateral analysis.

Analyze As

Other

Brace Properties | 903

Summary of Contents for 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands