manualshive.com logo in svg

Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010, User Manual

Share
Download
Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual Download Page 1119

Tagging a Revision Cloud

A revision tag identifies the revision assigned to each cloud in a view. (You enter revision information on
the Sheet Issues/Revisions dialog. See 

Entering Revision Information

 on page 1070.)

To tag revision clouds

1

If the revision tag family is not yet loaded into the project, load it.

A project created using the default project template includes the Revision Tag or M_Revision
Tag family. To check whether another revision tag family is loaded, in the Project Browser, under
Families

 ➤ 

Annotation Symbols, look for the revision tag family name. To load a revision tag

family, see 

Loading Families

 on page 427 for instructions.

2

Open the view that contains revision clouds.

3

Click Annotate tab

 ➤ 

Tag panel

 ➤ 

Tag By Category.

4

In the drawing area, select the revision clouds to tag.

As you select each cloud, Revit Architecture displays a revision tag next to it. Numbers in the
tags reflect the revisions assigned to the clouds. (See 

Assigning a Revision to a Revision Cloud

on page 1076.) On sheets, these tag numbers can differ. (See 

Revision Cloud Numbering by Project

or by Sheet

 on page 1072.)

5

If desired, adjust the positions of the tags and their leader lines, as follows:

a

Press Esc to exit the Tab by Category tool.

b

Select a revision tag.

You may need to zoom in to see the controls for the revision tag.

c

To reposition the tag, drag the blue arrows.

d

To adjust the elbow in its leader line, drag the blue dot.

e

To remove the leader line, on the Options Bar, clear Leader.

f

To assign the tag to a different revision cloud, click Modify Revision Cloud Tags tab

 ➤ 

Tag

panel

 ➤ 

Pick New Host. In the drawing area, select the desired revision cloud for the tab.

For more information about applying a tag to an element, see 

Tags

 on page 1123.

Hiding a Revision Cloud

You can hide revision clouds in a view. The method you use to hide revision clouds can determine whether
the revision information (for the hidden clouds) displays in the revision schedule of a sheet.

To hide revision clouds but include their revisions in a revision schedule, use either of the following methods:

■

Sheet Issues/Revisions dialog

. (See 

Entering Revision Information

 on page 1070.) Use the Show column to

indicate whether revision clouds and tags display for each revision. This setting affects all views in the
project.

■

Hide in view > Category

. In a view, select one or more revision clouds, right-click, and click Hide in

view

 ➤ 

Category. This tool hides all clouds in the view.

To hide revision clouds and omit their revisions from a revision schedule, use either of the following methods.
By default the revision schedule of the view’s sheet does not include the revision information for these

Revision Clouds | 1077

Summary of Contents for 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands