manualshive.com logo in svg

Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010, User Manual, Page: 904 / 1638

Share
Download
Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual Download Page 904

Description

Name

warning using the Review Warnings tool. See 

Reviewing Warning Messages

on page 1415.

Phasing

Indicates in which phase the beam component was created. See 

Project

Phasing

 on page 1331.

Phase Created

Indicates in which phase the beam component was demolished. See 

Project

Phasing

 on page 1331.

Phase Demolished

Structural Analysis

Start release conditions. Either Fixed, Pinned, Bending Moment, or User
Defined. User Defined allows you to enable/disable each of the start release
conditions.

Start Release

Translational release at the start end of the beam along the x-axis.

Start Fx

Translational release at the start end of the beam along the y-axis.

Start Fy

Translational release at the start end of the beam along the z-axis.

Start Fz

Rotational release at the start end of the beam along the x-axis.

Start Mx

Rotational release at the start end of the beam along the y-axis.

Start My

Rotational release at the start end of the beam along the z-axis.

Start Mz

End release conditions. Either Fixed, Pinned, Bending Moment, or User
Defined. User Defined allows you to enable/disable each of the end release
conditions.

End Release

Translational release at the end of the beam along the x-axis.

End Fx

Translational release at the end of the beam along the y-axis.

End Fy

Translational release at the end of the beam along the z-axis.

End Fz

Rotational release at the end of the beam along the x-axis.

End Mx

Rotational release at the end of the beam along the y-axis.

End My

Rotational release at the end of the beam along the z-axis.

End Mz

Used by external analysis applications to determine whether beam conditions
contribute to lateral analysis.

Analyze as

Analytical Model

Extends the beam analytical model to the level specified, in the Z direction.

Vertical Projection

Specifies the placement of the analytical model in the center of the beam.

Auto-detect Horizontal Projection

862 | Chapter 14   Structural Modeling

Summary of Contents for 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments