manualshive.com logo in svg

Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010, User Manual

Share
Download
Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual Download Page 881

Description

Name

Volume of the selected column. A read-only value.

Volume

Identity Data

User comments.

Comments

A label created for the column. Possible use: shop mark. This value must be unique
for each element in a project. Revit Architecture warns you if the number is already

Mark

used but allows you to continue using it. You can see the warning using the Review
Warnings tool. For more information, see 

Reviewing Warning Messages

 on page

1415.

Phasing

Indicates in which phase the column component was created. For more information,
see 

Project Phasing

 on page 1331.

Phase Created

Indicates in which phase the column component was demolished. For more inform-
ation, see 

Project Phasing

 on page 1331.

Phase Demolished

Structural Analysis

Either fixed, Pinned, Bending Moment or User-Defined. User-Defined allows you
to enable/disable each of the top release conditions.

Top Release

Translational release at the top end of the column along the x-axis.

Top Fx

Translational release at the top end of the column along the y-axis.

Top Fy

Translational release at the top end of the column along the z-axis.

Top Fz

Rotational release at the top end of the column along the x-axis.

Top Mx

Rotational release at the top end of the column along the y-axis.

Top My

Rotational release at the top end of the column along the z-axis.

Top Mz

Either fixed, Pinned, Bending Moment or User-Defined. User-Defined allows you
to enable/disable each of the bottom release conditions.

Bottom Release

Translational release at the bottom end of the column along the x-axis.

Bottom Fx

Translational release at the bottom end of the column along the y-axis.

Bottom Fy

Translational release at the bottom end of the column along the z-axis.

Bottom Fz

Rotational release at the bottom end of the column along the x-axis.

Bottom Mx

Rotational release at the bottom end of the column along the y-axis.

Bottom My

Rotational release at the bottom end of the column along the z-axis.

Bottom Mz

Either Hanger, Gravity, Lateral, or Not for analysis. Used by external analysis applic-
ations to determine whether the column contributes to lateral analysis.

Analyze As

Structural Column Properties | 839

Summary of Contents for 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands