Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010, User Manual, Page: 169 / 1638

NOTE If you create duplicate plan views, the duplicate view appears in the Project Browser with the
following notation: Level 1(1), where the value in parentheses increases with the number of duplicate
views.
Cutting a Plan View by the Back Clip Plane
You may want to cut a plan view at the back clip plane when you have an element (such as a slanted wall)
that spans multiple levels. If you only want the wall visible in the plan view as it appears in the view range
of level 3, you can clip the wall from view using the Depth Clipping parameter. The following image illustrates
this.
You activate this feature using the Depth Clipping parameter for the plan view. The back clip plane is defined
by the View Depth parameter, which is part of the view’s View Range properties.
NOTE Plan views include floor plan views, reflected ceiling plan views, detail plan views, and callout plan views.
The following image shows the cut plane and view depth for this model and the resulting plan view
representations for the Depth Clipping parameter options (Clip without line, Clip with line, and No clip).
Cutting a Plan View by the Back Clip Plane | 127