manualshive.com logo in svg

Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010, User Manual

Share
Download
Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual Download Page 530

Material Identity Parameters

When you enter search text to find a material, Revit Architecture searches the values of all parameters on
the Identity tab of the Materials dialog. (See 

Searching for a Material

 on page 470.) Also, you can include

most of these parameters in a material takeoff. (See 

Material Takeoff Schedules

 on page 174.)

Description

Parameter

Filter Criteria

Class assigned to the material. Assign an existing class, or create a new
one. See 

Adding a Material Class

 on page 487.

Material Class

Descriptive Information

Description of the material. This value displays in material tags for elements.
See 

Material Tags

 on page 1128.

Description

User-defined comments or other information about the material. If the
value is Render appearance not upgraded, assign a new render appearance

Comments

to the material. See 

Changing the Render Appearance of a Material

 on

page 475.

Words that may be useful when searching for the material, and that are
not used in the material description, comments, or other fields. For ex-

Keywords

ample, you might include the keywords green and blue to ensure that
turquoise is included in search results for blue paint or green paint.

Product Information

Name of the manufacturer of the material.

Manufacturer

Model number or code assigned to the material by the manufacturer.

Model

Cost of the material.

Cost

URL of the Web site for the manufacturer or vendor.

URL

Annotation Information

Keynote for the material. Enter text or click the button to select a standard
keynote. See 

Keynotes

 on page 1117.

Keynote

User-defined identification number for the material.

Mark

Changing Material Physical Data

The Physical tab of the Materials dialog displays structural information about the selected material. This
information is used in the structural analysis of buildings.

Creating a Material Physical Parameter Set

1

In the Materials dialog, select a material.

See 

Searching for a Material

 on page 470.

488 | Chapter 10   Customizing Project Settings

Summary of Contents for 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands