80
Out Aspect Ratio
This setting selects between 4:3 and 16:9 aspect ratio as described in Screen Type above. To set
OUT ASPEDT RATIO
, press the
▼
/
▲
Navigation Button [oval 16]
until the cursor is positioned
next to
OUT ASPECT RATIO.
Press the
◄
/
►
Navigation Button [oval 16]
to select the
appropriate setting.
Component Out
With the cursor positioned next to the
COMPONENT OUT
Line, press the
◄
/
►
Navigation Button
[oval 16]
to choose
1080i
for High Definition, (any device capable of accepting an input signal
of 480P or higher) or
480i
for a standard resolution video display.
HDMI Enhancement
This setting allows connection and use of the
HDMI Output [circle 18]
on the AVR rear panel
with an HDMI capable HD Video Display. HDMI transfers uncompressed digital video and audio
signals to like capable devices for best quality sound and image. Selecting
YES
will disable the
Monitor Component Video Output [circle 15]
. (Conversely, selecting
NO
disables the
HDMI
OUT [circle 18]
). The Monitor Component Video Output and HDMI Output cannot be used
simultaneously. To activate the HDMI Output, with the cursor next to
HDMI ENHANCEMENT
, press
the
◄
/
►
Navigation Button [oval 16]
to select
YES.
If using the Monitor Component Video
Output, select
NO.
HDMI Audio
This setting allows or disables the output of uncompressed digital audio signals from the
HDMI
Output [circle 18]
on the AVR rear panel. Selecting
YES
will allow HDMI audio output so the
Main Room Video Display can output audio through its speakers. Selecting
NO
will disable the
HDMI output from the AVR so the only speaker level output in the Main Room will be through the
speakers connected to the AVR (in most cases, better quality speakers and surround effects). To
set
HDMI AUDIO
, with the cursor next to
HDMI AUDIO
, press the
◄
/
►
Navigation Button [oval
16]
to select the desired setting.
When all needed adjustments have been made, press the
▼
/
▲
Navigation Button [oval 16]
until
the cursor is next to
BACK TO MAIN ROOM
to continue with the system configuration and press
the
Set Button [oval 18]
or press the
Exit Button [oval 17]
to return to operational mode.
ADVANCED SETTINGS
The AVR21EN is equipped with a number of advanced features that add extra flexibility to the
unit’s operation. While it is not necessary to use these features to operate the unit, they provide
additional options that you may wish to use.
Front-Panel Timeout
In normal operation, the AVR21EN front-panel displays and indicators remain on at full brightness.
As an option, you may dim them or turn them off. As an additional option, you may also set the
AVR so that the displays appear whenever a button is pressed on the front panel or remote, but
then fade out after a set period of time.
To set front-panel Timeout, press the
Menu Button [oval 44]
on the remote to bring the
MAIN
MENU
to the screen. Press the
▼
/
▲
Navigation Button [oval 16]
so that the cursor is pointed to
the
MAIN ROOM SETUP
line. Press the
Set Button [oval 18]
. Press the
▼
/
▲
Navigation
Button [oval 16]
so that the cursor is pointed to the
ADVANCED
line. Press the
Set Button [oval
18]
. Press the
▼
/
▲
Navigation Button [oval 16]
so that the cursor is pointed to the
FRNT
PANEL TIMEOUT
line. Next, press the
◄
/
►
Navigation Button [oval 16]
to set the amount of
time that you wish the displays to fade out after a button is pressed is shown. Range: 3-9
seconds, OFF.
Summary of Contents for AVR21EN
