146
2.
Page/Monitor Microphone:
1, miniature microphone, allows whole-house paging, group
paging, talking between rooms and monitoring audio in a selected room via W.H.E.N.
Multiroom Link connections.
3.
Keypad/Zone/System Power ON/OFF Button:
1, backlit button turns the local keypad/zone
ON when the system is active in other zones. When system is OFF, this button will activate
the AVR21EN, all common source components and the local zone. When zone is active, the
power button brightens to full illumination. If the power button is pressed when a keypad/zone
is active (ON), the zone will turn off. If the local zone is the last zone active in the system,
pressing the power button will turn off the local zone, the AVR21EN and all common source
components. When zone is inactive (OFF) the power button dims to half brightness.(The
Power Button is never full off unless power has been removed from the keypad.)
4.
IR Sensor:
1, photodiode, ‘sees’ IR commands transmitted by a hand held IR remote control,
allowing armchair zone and system control.
5.
Keypad Bezel Snaptabs:
2, plastic tabs, protrude from either side of the KP21 and snap into
slots on the back of a KP21 Bezel to hold the screwless bezel in place.
6.
Menu/Function Select Button:
1, backlit button, allows selection of various menu options
and execution of various source control functions depending upon the Menu page and mode
currently selected. In Main Menu this button selects ENTERTAINMENT, which opens the
common and local source control menus.
7.
Menu/Function Select Button:
1, backlit button, allows selection of various menu options
and execution of various source control functions depending upon the Menu page and mode
currently selected. In Main Menu this button selects PAGING, which opens the All, Group and
Keypad Paging Menus.
8.
Menu/Function Select Button:
1, backlit button, allows selection of various menu options
and execution of various source control functions depending upon the Menu page and mode
currently selected. In Main Menu this button selects MONITOR, which allows selective zone
audio and/or video monitoring as allowed in the system configuration.
9.
Menu/Function Select Button:
1, backlit button, allows selection of various menu options
and execution of various source control functions depending upon the Menu page and mode
currently selected. In Main Menu this button selects SETUP, which allows configuration of
various zone functions such as: Turn on volume, tone controls, paging volume, multiple EQ
options and backlight settings.
10.
Menu Page Down Button:
1, backlit button, allows selection of the previous page in a menu
tree. When the top level of a menu tree has been reached, the button has no function. A left
pointing arrow with a corresponding page number will appear on the keypad LCD
Information Display [hexagon 13]
just above the volume bar indicating page down options.
If the arrow and page number are not visible, the bottom level of the menu tree has been
reached.
11.
Main Menu Button:
1, backlit button allows return to the Main Menu from any selected
keypad menu page.
12.
Back Button:
1, backlit button, will return to the previous page within a selected menu and
then ultimately return to the Main Menu. (This is slightly different from the Menu Page Down
Button, which only functions within a selected multi-page sub-menu and stops at the bottom
of that menu.)
Summary of Contents for AVR21EN
