27
9.
Disc 1 Component Video Inputs:
Connect the component video outputs of a DVD player or
any other video source equipped with Y/Pr/Pb or RGB component video outputs to these
jacks. The factory default is for these jacks to be linked to the
Disc 1 Analog Audio Inputs
[circle 1]
and the
Coaxial 1 Digital Audio Input [circle 19]
, but you may change the digital
audio input setting at any time through the
MAIN ROOM/SOURCES
menu as described in
Main Room Setup/Source Audio Input
. See section:
Main Room Setup/Source Video
for
more information on configuring the component video inputs.
10.
Disc 2 Component Video Inputs:
Connect the component video outputs of a DVD player or
any other video source equipped with Y/Pr/Pb or RGB component video outputs to these
jacks. The factory default is for these jacks to be linked to the
Disc 2 Analog Audio Inputs
[circle 2]
and the
Coaxial 2 Digital Audio Input [circle 19]
, but you may change the digital
audio input setting at any time through the
MAIN ROOM/SOURCES
menu as described in
Main Room Setup/Source Audio Input
. See section:
Main Room Setup/Source Video
for
more information on configuring the component video inputs.
11.
8-Channel DVD Audio Inputs:
These jacks are used for connection to source devices such
as DVD-Audio or SACD players with discrete analog outputs. Depending on the source
device in use, all eight jacks may be used, though in many cases only connections to the
front left/right, center, surround left/right and LFE (subwoofer input) jacks will be used for
standard 5.1 audio signals.
12.
Disc 3 Component Video Inputs:
Connect the component video outputs of a DVD player or
any other video source equipped with Y/Pr/Pb or RGB component video outputs to these
jacks. The factory default is for these jacks to be linked to the
Disc 3 Analog Audio Inputs
[circle 3]
and the
Optical 2 Digital Audio Input [circle 24]
, but you may change the digital
audio input setting at any time through the
MAIN ROOM/SOURCES
menu as described in
Main Room Setup/Source Audio Input
. See section:
Main Room Setup/Source Video
for
more information on configuring the component video inputs.
13.
Cable/Sat Component Video Inputs:
These inputs may be used with any video source
device equipped with analog Y/Pr/Pb component video outputs. These jacks are permanently
linked to the Cable/Satellite source input.
14.
AUX Component Video Input:
These inputs may be used with any video source device
equipped with analog Y/Pr/Pb component video outputs. These jacks are permanently linked
to the AUX source input.
15.
Monitor Component Video Output:
Connect these outputs to the component video inputs
on the Main Room video projector or monitor.
16.
Preamp Outputs:
Connect these jacks to an optional, external power amplifier for
applications where higher power is desired.
17.
Subwoofer Output:
Connect this jack to the line level input of a powered subwoofer. If an
external subwoofer amplifier is used, connect this jack to the subwoofer amplifier input.
18.
HDMI Output:
Connect this jack to the HDMI input on a projector or monitor. HDMI
connections should be restricted to a maximum cable length of about 50 feet.
19.
Coaxial Digital Audio Inputs:
Connect the coaxial digital output from a DVD player, HDTV
receiver, the S/P-DIF output of a compatible computer sound card playing MP3 files or
streams, LD player or CD player to these jacks. The signal may be a Dolby Digital signal,
DTS signal or a standard PCM digital source. Do not connect the RF digital output of an LD
player to these jacks.
Coaxial 1 [circle 19]
is assigned as the default to Disc 1 and
Coaxial 2
Summary of Contents for AVR21EN
