Audioaccess AVR21EN, Installation Instructions Manual

Page: 143 / 222

143
5.
AVH21 A/V Hub Power Terminal: 1, four position plug-in terminal connects to Power In
[pentagon 9] on an AVH21 A/V Hub to provide DC voltage to the A/V Hub and connected
KP21 Keypads.
6. AC Power Cord Jack: Connect the AC power cord to this jack when the installation is
complete. To ensure safe operation, use only the power cord supplied with the unit. If a
replacement is required, it must be of the same type and capacity.
WPS21 TOP PANEL FEATURES
Figure 79 WPS21 Top Panel Features
3. WPS Mounting Flange
7. Mounting
Screw Holes
8. WPS Status Panel
WPS TOP PANEL FEATURE DESCRIPTIONS
3. WPS Mounting Flange: 2, chassis metal extensions, one on either side of the WPS21 used
for vertical installation to structured wiring panels or wall surfaces using the mounting screw
holes. The mounting flange also creates a space under the WPS21 for organized wire and
cable management.
7. Mounting Screw Holes: 8, slots, four on each mounting flange used for attaching the
WPS21 to a structured wiring panel or wall surface. These holes are punched to fit the hole
patterns on Channel Vision C-0128E and Leviton 47605-28W structured wiring panels.
(These specific models will each accept 3 hubs.)
8. WPS Status Panel:
1, adhesive lexan label, fits into the recess on a WPS21 top panel to
indicate: power, hub connection and keypad connections. Three different labels provide
proper identification of keypad/zone configuration by Hub (i.e. Hub 1, keypads/zones 1-7;
Hub 2, keypads/zones 8-14; Hub 3, keypads/zones 15-20) for confirmation of connections
and activity during installation and troubleshooting.