155
41.
Menu/Info Button:
This multipurpose button has a different function depending on the
source in use. In DVD mode, this button accesses the menu on the current disc, enabling you
to select the main feature or accompanying featurettes for playback or make other selections,
depending on how the disc is programmed. For cable and satellite, this button will activate an
on-screen menu.
42.
Zoom/Memory Button:
When used with Radio 1 or Radio 2, press this button to enter the
currently tuned radio station into a desired preset location using the
Alphanumeric Keys
[triangle 43]
to select the preset location between the numbers 01 and 30. Press this button
a second time to store your selection. To recall that station later, select the Radio 1 or Radio
2 as the source, then either use the
Preset Up/Down
Buttons [triangles 16, 39]
to scroll to
the desired preset station, or use the
Alphanumeric
Keys [triangle 43]
to directly enter the
preset station location. In DVD mode, this button may be used while a DVD-Video disc is
playing to zoom the picture so that it is enlarged. There are four steps to the zoom function,
each progressively larger. Continue pressing the button to cycle through the steps and return
to the normal view. Depending on the disc, you may also be able to use the
▼
/
▲
/
◄
/
►
Navigation Controls
[triangle 13]
to view different areas of the enlarged image.
43.
Alphanumeric Keys:
Select channel, disc or track numbers by pressing these keys.
44.
Door Open Button:
Press this button to open an electronic doorlock controlled with one of
the AVH21 Door Relays.
45.
Door Answer:
Press this button to listen to a two-way audio door monitor connected to the
Door A/V jacks on the AVR21EN. Press and Hold to talk to the front door device.
46.
Talk Button:
Press and Hold this button when in a zone that has been Paged, to activate the
local zone keypad microphone, and talk back to the zone that initiated the Page.
47.
Monitor Button:
Press this button to switch the speakers and video display to the last
keypad selected for the Monitor Function. That is, if the baby’s room was last selected for
audio and video monitor it will be selected when the Monitor Button is pressed. Repeated
presses will scroll through the Monitor Modes, Audio/Video, Video, Audio.
48.
Local 1 Select Button:
Press this button to select and control the device connected to the
local keypad’s AUX-IN. Commands for controlling this device must be configured in the
KP21R remote. See section:
Programming the KP21R Remote/Learning Commands
.
49.
Mute Button:
Press this button to momentarily silence the KP21 keypad. Press it again, or
use the
Volume Up/Down
Control [triangle 17]
to restore audio.
50.
IR Transmitter/Receiver:
The infrared emitters and receivers behind the plastic lens at the
top of the remote communicate the remote codes to the KP21 keypad and other programmed
devices. Be certain that the lens is not covered when using the remote, and point the lens
toward the AVR21EN for the best results. In learning mode, the remote receives IR codes to
be learned through a receiver behind the lens. See section:
Programming the KP21R
Remote/Learning Commands
for more information on learning remote codes.
NOTE:
DO NOT remove the rubber plug that is supplied to cover the jack on the upper right side
of the remote. The jack is not active and is reserved for future use.
Summary of Contents for AVR21EN
