178
This section names the Wake-Up Groups. Building the groups will be done in a later section. To
name Wake-Up Groups:
1. From
ZONE SETUP PAGE 1
, with the cursor next to
NAME WAKE-UP GROUPS
, press the
Set Button [oval 18]
. The
NAME WAKE-UP GROUPS
screen will appear. (
Figure 105
)
2. Press
the
▼
/
▲
Navigation Button [oval 16]
to position the cursor next to
NAME
. Press the
Set Button
. A white rectangle will flash to the right of
NAME:
indicating that the remote can
be used to enter the letters for the group name.
3. Using either the
▼
/
▲
Navigation Button [oval 16]
or the
Alphanumeric Buttons [oval 46]
,
enter the first letter for the group name. (i.e. MASTER SUITE). When the first letter appears
on screen, press the
►
Navigation Button [oval 16]
to move the cursor to the next letter
position.
4. Repeat steps 2-3 above until the Wake-Up Group Name has been spelled out. A Group
Name can have up to 12 letters. Press the
Set Button [oval 18]
. This will store the name and
return the cursor to the arrow next to
NAME
.
5. To name additional groups, press the
▼
/
▲
Navigation Button [oval 16]
to position the
cursor next to
GROUP
. Press the
◄
/
►
Navigation Button [oval 16]
to select another group.
6. Repeat steps 2-4 until all desired Wake-up Groups have been named. Up to 8 Wake-Up
Groups can be created.
To exit setup, press the
Exit Button [oval 17]
. To continue Zone Setup, position the cursor next
to
BACK TO ZONE SETUP
and press the
Set Button [oval 18]
.
ZONE SETUP PAGE 1
will
appear.
Figure 106 Name Sleep Groups Screen
Name Sleep Groups
Sleep Groups set scheduled times to shut down specific zones or groups of zones. This is a
convenient feature for turning off the Patio Zone at a pre-determined time as to not disturb the
neighbors or for managing systems if zones are turned on and then left alone. NOTE: It is not
necessary to set a Sleep Group for a Wake-Up Group. Wake-Up Groups have a preset duration
for activity before they shut off automatically.
This section names the Sleep Groups. Building the groups will be done in a later section. To
name Sleep Groups:
1. From
ZONE SETUP PAGE 1
, with the cursor next to
NAME SLEEP GROUPS
, press the
Set
Button [oval 18]
. The
NAME SLEEP GROUPS
screen will appear. (
Figure 106
)
2. Press
the
▼
/
▲
Navigation Button [oval 16]
to position the cursor next to
NAME
. Press the
Set Button [oval 18]
. A white rectangle will flash to the right of
NAME:
indicating that the
remote can be used to enter the letters for the group name.
3. Using either the
▼
/
▲
Navigation Button [oval 16]
or the
Alphanumeric Buttons [oval 46]
,
enter the first letter for the group name. (i.e. PATIO). When the first letter appears on screen,
press the
►
Navigation Button [oval 16]
to move the cursor to the next letter position.
Summary of Contents for AVR21EN
