78
When all delay settings made using the menu system have been completed, press the
▼
/
▲
Navigation Button [oval 16]
until the cursor is pointing to the
BACK TO MAIN MENU
line
and press the
Set Button [oval 18]
.
REC OUT
The
REC OUT
line gives you the opportunity to select which type of audio signal is directed to the
Record Output Jacks associated with
VR [square 5]
, and
AUX [square 8]
. The default setting is
ANALOG
, which will send the analog signal from any source to all three sets of analog record
outputs.
In cases in which you wish to have the output of a digital source selected as the record output
feed, with the cursor next to
REC OUT
, press the
◄
/
►
Navigation Button [oval 16]
so that
DSP
DOWNMIX
appears. When this indication is shown, the AVR will feed a downmixed, analog version
of a Dolby Digital or DTS encoded signal to the Record Output jacks associated with
VR [square
5]
,
AUX [square 8]
and the
Game/Cam [squares 19, 20, 22, 23]
AVR front panel jacks (when
they are configured as outputs). This enables you to make an analog recording (where permitted
by copyright laws) of the soundtrack from a digital source.
As a reminder, to ensure that a signal feed is always available to the record output jacks, we
recommend that an analog connection be made as a fallback for all digital sources. This is key
with sources such as cable set-tops to ensure that a record feed will continue in the event that the
digital audio stream is not available when channels are changed.
When all needed adjustments have been made, press the
▼
/
▲
Navigation Button [oval 16]
until the cursor is next to
VIDEO MONITOR SETTINGS
, to make additional Main Room
adjustments or
BACK TO MAIN MENU
to continue with the system configuration or press the
Exit
Button [oval 17]
on the remote to return to operational mode.
VIDEO MONITOR SETTINGS
The
VIDEO MONITOR SETTINGS
are global, rather than input-dependant, as there is only one
Main Room display connected to the AVR. The settings here are primarily changes to the video
enhancement level and aspect ratio for a specific type of device, and defaults were selected after
testing on a wide range of product brands. To change this setting, press the
▼
/
▲
Navigation
Button [oval 16]
so that the on-screen cursor is pointing to
VIDEO MONITOR SETTINGS
and
then press the
Set Button [oval 18]
. The
VIDEO MONITOR SETTINGS
screen will appear.
(
Figure 30
)
Figure 30 Video Monitor Settings Screen
Press the
◄
/
►
Navigation Button [oval 16]
to select from among the options shown for the type
of display that is connected to the AVR21EN. The options are:
Summary of Contents for AVR21EN
