Audioaccess AVR21EN, Installation Instructions Manual

Page: 193 / 222

193
2. Using the ◄ / ► Navigation Button [oval 16] , select the source that the group being
configured is to switch to: LAST, LOCAL, DISC 1, DISC2, DISC 3, RADIO 1, RADIO 2,
A/V/AUX, VIDEO RECORDER, CABLE/SAT.
3. To continue Setup, press the ▼ / ▲ Navigation Button [oval 16] to position the cursor next to
GO TO SLEEP 1 PAGE 2 . Press the Set button [oval 18] . The SLEEP SETUP 1-2 screen
will appear. ( Figure 118 )
Figure 118 Sleep Setup 1-2
Sleep Group
Reference only. Not configurable in this screen.
Volume Setting
This setting configures the volume that all zones in the group being configured will change to
when Sleep Time is reached.
To configure Volume Setting:
1. In
the SLEEP SETUP 1-2 screen, press the ▼ / ▲ Navigation Button [oval 16] to position
the cursor next to
VOLUME SETTING
.
2. Using the ◄ / ► Navigation Button [oval 16] , set the sleep volume that the group being
configured is to switch to: Range: -10 to -50dB.
Local Control
This setting allows an individual zone’s keypad to have the ability to set Sleep and Wake-Up
settings for the local zone
.
To configure Local Control:
1. In
the
SLEEP SETUP 1-2
screen, press the ▼ / ▲ Navigation Button [oval 16] to position
the cursor next to
LOCAL CONTROL
.
2. Using the ◄ / ► Navigation Button [oval 16] , set the keypads in the group being configured:
YES/NO.
To change settings in Sleep 1 Page 1, position the cursor next to
GO TO SLEEP 1 PAGE 1
and
press the Set Button [oval 18] . Make changes as desired.
To set a second Wake-Up time for the Group currently being configured, position the cursor next
to:
GO TO SLEEP 2
. Press the Set Button [oval 18] and follow previous instructions starting at
SLEEP GROUP
.
To make changes or confirm settings in Zone Setup, position the cursor next to
BACK TO ZONE
SETUP
or
GO TO PAGE 2
. Press the Set Button [oval 18] . Use the ▼ / ▲ / ◄ / ► Navigation