135
AVR21EN SPECIFICATIONS
Audio Section
Stereo Mode
Continuous average power (FTC):
100 Watts per channel, 20Hz–20kHz,@
<0.1%THD, both channels driven into 8 ohms
Seven-channel surround modes,
power per channel, all channels driven:
70 Watts per channel @ <0.1% THD,20Hz–
20kHz into 8 ohms
Input sensitivity/impedance
linear (High-Level):
200mV/47k ohms
Signal-to-noise ratio (IHF-A):
97dB
Surround system adjacent channel separation
Dolby® Pro Logic® I/II/IIx:
40dB
Dolby®
Digital:
55dB
DTS®:
55dB
Transient Intermodulation Distortion (TIM):
Unmeasurable
FM Tuner Section
Frequency range:
87.5–108.0MHz
Usable sensitivity:
IHF 1.3
μ
V/13.2dBf
Signal-to-noise ratio:
mono/stereo 70/68dB
Distortion (mono/stereo):
0.2/0.3%
Stereo separation:
40dB @ 1kHz
Selectivity:
±400kHz, 70dB
Image rejection:
80dB
IF rejection:
90dB
AM Tuner Section
Frequency range:
520kHz –1720kHz
Signal-to-noise ratio:
45dB
Usable sensitivity:
loop 500
μ
V
Distortion:
1kHz, 50% mod 0.8%
Selectivity:
±10kHz, 30dB
Video Section
Television format:
NTSC
Input level/impedance:
1Vp-p/75 ohms
Output level/impedance:
1Vp-p/75 ohms
Video frequency response
Composite and S-video:
10Hz–8MHz (–3dB)
Component video:
10Hz–50MHz (–3dB)
General
Power Requirement:
AC 120V/60Hz
Power Consumption:
Standby:
8.9W
Idle:
58W
Max (7channels driven):
1073W
Summary of Contents for AVR21EN
