Aquaread LeveLine Instruction Manual Download Page 9

Page: 9 / 90

LeveLine

Instruction Manual

10401-01026 Rev D

1.2.2. Connection of a LeveLine

Logger to a PC via an extension cable

This option can be used to setup the Logger, read live data or upload logged data whilst the
LeveLine

Logger is installed.

The LeveLine

USB to Extension Adaptor (Part No. LL-USB-EXT-AD) shown above

provides an interface between the LL-PC-KIT and any length of LeveLine

extension cable

(Part No. EXT-LL-XM).

1.2.3. Connection of a LeveLine

Logger to a LeveLine

Meter

This option can be used to setup the Logger, read live data or upload logged data whilst the
LeveLine

Logger is installed. For this, a LeveLine

extension cable (Part No. EXT-LL-XM)

is required.

1.2.4. Direct Connection of a LeveLine

Meter to a PC

This option can be used to retrieve data from a LeveLine

Meter, that has been previously

uploaded to that Meter from a LeveLine

Logger.

For this, a LeveLine

PC kit is required and a LeveLine

Meter to USB adaptor (Part No.

LLM-USB-AD). This adaptor is supplied as standard with the LeveLine

Meter.

Ltd.

www.aquaread.com

Page 9 of 90

Summary of Contents for LeveLine



























































































Search results

Summary of Contents for LeveLine

Reviews:

Brands by name

Popular brands

Aquaread LeveLine, Instruction Manual

Search results

Summary of Contents for LeveLine

Reviews:

Brands by name

Popular brands